multiACE USB Cable

Ready-made cable

multiACE USB Cable

USB-A to Micro-Fit 3.0 (2x2) for Anycubic ACE Pro and ACE Pro 2

  • Factory assembled and crimped. No soldering, no screw terminals.
  • Fits ACE Pro and ACE Pro 2 (firmware 1.1.31 or later).
  • Shielded data line, VCC not connected. Plug in and go.

€22.00incl. VAT, per cable

The checkout accepts delivery addresses in the selected region only.

1 × €22.00€22.00
Shipping–
Total–
Select your region

Up to 4 cables per order, shipping is charged once. Secure checkout by Stripe, card or PayPal. Delivery 2 to 4 working days in Germany, 5 to 15 abroad.

We cannot ship to EU countries other than Germany, or to the United Kingdom, Norway, Iceland, Liechtenstein, Russia and Belarus.

multiACE USB adapter cable
Requirements
  • Klipper printer or Klipper host running mUlt1ACE (e.g. Snapmaker U1)
  • ACE Pro 2: firmware 1.1.31 or later
  • The ACE's own connection cable, not included (ACE Pro: 6-to-4-pin cable, ACE Pro 2: K3 cable). This cable plugs onto its 4-pin end.
In the box
  • 1x multiACE USB adapter cable
  • Product leaflet (DE/EN)
Technical data
Connector 1
USB Type A, USB 2.0, gold-plated contacts
Connector 2
Molex Micro-Fit 3.0, 2x2, pin contacts
Wiring
D+, D-, GND (VCC not connected)
Wires
D+/D- twisted, shielded
Power
None, the ACE uses its own power supply
Safety
  • Only plug or unplug while printer and ACE are switched off.
  • Connect the Micro-Fit plug only to the 4-pin end of the ACE connection cable.
  • Do not modify the plugs or rearrange contacts. Wrong wiring can damage hardware.
  • Do not kink, crush or run the cable near hot parts.
  • Dry indoor use only. Do not use a damaged cable.
  • Keep away from children: small parts, strangulation risk.

Not an original Anycubic or Snapmaker accessory. Brand names are used only to state compatibility. Software changes on the printer are at your own risk.

Product information

Manufacturer: Dirk Klinksiek IT Service, Schaapkamp 10a, 21147 Hamburg, Germany, info@postapocalyptic-diy.com · Product type multiACE USB · WEEE-Reg.-Nr. DE 71304701

Statutory warranty

You have at least two years of statutory warranty (legal guarantee of conformity). If the cable was faulty on delivery or does not work as described, you are entitled to repair or replacement free of charge, and in certain cases to a price reduction or a full refund.

Report the problem as soon as possible and keep your receipt or invoice. More: Your Europe. Open the notice full size.

Statutory warranty: for at least two years you are entitled to repair, replacement, price reduction or a refund if the goods were faulty on delivery.